题目

When you load a project,SONAR checks to see if the exact same output ports are assigned as when the project was saved.SONAR’s port assignments can change if you load the project on a different hardware configuration or change driver models.If there is any discrepancy between the port assignments that were saved and the ports that are used in the current configuration,the ports are set to “None” and the Silent Buses Detected dialog displays all track and bus outputs from the current project that have been assigned to a silent output.
The Silent Buses Detected dialog also appears if any track or bus output is assigned to “None” as a result of changing the audio configuration.

提问时间：2020-11-10

答案

当加载一个项目时,SONAR就检查是否完全相同的输出端口时,该项目作为储存分配.声纳的端口分配可以改变,如果你装上不同硬件配置,或更改驱动程序模型的项目.如果有任何港口之间的分配和被保存了在当前的配置使用的端口的分歧,以端口设置为“None“和沉默的对话显示检测到的公交车从当前项目的所有曲目和巴士已输出分配给一个沉默的输出.
无声的对话也出现公交车,如果检测到任何轨道或总线输出被分配到“无“作为改变音频配置的结果.