题目

英语翻译
note:
1.material polished 0.6mm/0.24 in.thick 300 series stainless steel.
2.specification #70-303(U.L TEST FOR SHARP EDGES)SHALL APPLY .
3.the geometry and surfaces shown in this drawing are merely a two dimensional (2d) representation of the part.actual geometry and surfaces are accurately represented in the 3d part computer file.all reference(ref.) and non-dimensioned geometry and surfaces can only be created using the 3d part computer file.only dimensions shown that are not reference may be used to create the part.dimensions are mm/inch.
unless otherwise specified
1.do not scale drawing.
2.remove all burrs & sharp corners.
3.dimensions:decimal inches
millimeters
4.tolerance on dimensions.inches millimeter
THREE PLACE DECIMAL
TWO PLACE DECIMA
HOLES ON CENTERLINES WITHIN
ALLOWABLE ECCENTRICITY
ANGULAR

提问时间：2020-08-07

答案

1.材料抛光0.6mm/0.24 in.thick 300系列不锈钢.2.规格编号70-303 （ UL认证测试锋利） ,可以适用.三,几何形状和表面显示,在这方面制定代表该部分只是二维（2D）.实际上几何形状和表面准确地代表在三维的一部分,电脑...