题目

英语翻译
The 2 main parts should be parrallel as indicated with 2green lines
part 814.480 must be adjusted as follows
Extremity of the part 8.1.4 should be in contact with pare
1vsr71p1 and we must leave 1 mm gap for the spring
1vsr76,once asjustment is set ,tight part 844.08.00(bolt)
while holding part 1vsr713,make sure that 1mm gap is still
respected once bolt has been tighteen

提问时间：2020-08-04

答案

2个主要部分应该如2条绿线所示一样平行摆放,814.480 这个部分应作如下调整8.1.4 这一部分的极限值应与1和71p1有联系,并且应留出一毫米缝隙在弹簧1和76之间,一旦调整被设定好,拧紧844.08.00(.螺栓)当固定1vsr713部分...