题目

英语翻译
1、Ssince the output is MOSFET is switching,it is difficult to isolate the switching current from the supply current at the DRAIN.An alternative is to measure the BYPASS pincurretn at 6.1v
2、BYPASS pin is not intendd for sourcing supply current to external circuitry.
3、See Typical Performance Characteristics section for BYPASS pin strat-up charging waveform.
4、For current limit at other di/dt values,refer to Figure 25.
5、This parameter is derived from characterization.
6、This parameter is derived from the change in current limit measured at 1X and 4X of the didt shown in the Ilimit specification.
7、Auto-restart on time has the same temperature characteristics as the oscillator ( inversely proportional to frequency).

提问时间：2020-07-25

答案

1 ,ssince输出MOSFET的是开关,它是很难以隔离开关电流从电源电流在流失.另一种是测量绕道pincurretn在6.1v
2 ,旁路脚,是不是intendd采购的供应电流,外部电路.
3 ,见典型表现特征部分,为旁路脚战略部门行动充电波形.
4 ,为电流限制在其他涤/ dt的价值观,是指以数字25 .
5 ,这个参数是来自表征.
6 ,这个参数是从改变目前的极限测量1X和4倍的didt表现在ilimit规格.
7 ,自动重新启动的时间有相同的温度特性,作为振荡器（成反比频率） .