题目

求翻译一段英文 是关于机械方面的
G70 XI00. YI20. R200. ZIS0. WI0. H55. B72., where G70 is the name of the subpro- gram; X and Y are coordinates of measurement along the X and Y axes in the coordinate system of measurement; R is the plane of rapid feed of MH along axis Z in the coordinate system of measurement; Z is the coordinate of calculated measured surface position in the corrected coordinate system; W is the amount of possible deviation of the measured workpiece surface; H is the corrected coordinate system of the workpiece; B is the table position during mea- surement relative to its zero position.
The macrocommand for calling the subprogram for automatic basing on plane XOY along the hole is as follows:
The value of eSD on the rate of MH travel and time for interrogation of measuring gauges by the NC system (thls time can be taken as 8-16 msec). It follows from

提问时间：2020-07-25

答案

G70 XI00.YI20.R200.ZIS0.WI0.H55.B72.,where G70 is the name of the subpro- gram; X and Y are coordinates of measurement along the X and Y axes in the coordinate system of measurement; R is the plane of...